Cutter
RM750.00
*This is the replacement one pin cutter for the M2 and M2 Multi.
The m² multi is an electronic automatic activation device, operating on the principle of pressure reading. The primary means of detecting the altitude and fall rate is a pressure sensor. The altitude is calculated based on the difference between the two atmospheric pressures. The pressure at current altitude and pressure on landing location “GROUND ZERO”. The pressure on the landing location is measured and set after switching on the device during calibration. This pressure is automatically adjusted by a change in barometric pressure during the day without the need for user intervention. The m² multi checks the ambient barometric pressure every 32 seconds and it determines whether the aircraft has taken off. If yes, it begins to monitor the skydiver’s altitude and fall rate. The pressure sensor measures the atmospheric pressure 8 x per second in free fall.
The information collected is evaluated by means of a microprocessor and ingenious software and it is converted to a real fall rate and altitude. Thanks to this, the m² multi-device is capable of meeting the preset criteria of fall rate in combination with altitude above the landing location, cut the reserve parachute closing loop by means of the cutter and thus initiate the deployment sequence.
The device is activated only in the case the preset criteria are met; the criteria differ depending on the set profiles – STUDENT (Stu), INTERMEDIATE (Int), PROFESSIONAL (Pro), CANOPY PILOTING (Cpi) and TANDEM (Tan)
| color | Gray, Green, Red |
|---|
You must be logged in to post a review.
Related products
-
M2 Multi AAD
Read moreThe m² multi is an electronic automatic activation device, operating on the principle of pressure reading. The primary means of detecting the altitude and fall rate is a pressure sensor. The altitude is calculated based on the difference between the two atmospheric pressures. The pressure at current altitude and pressure on landing location “GROUND ZERO”. The pressure on the landing location is measured and set after switching on the device during calibration. This pressure is automatically adjusted by a change in barometric pressure during the day without the need for user intervention. The m² multi checks the ambient barometric pressure every 32 seconds and it determines whether the aircraft has taken off. If yes, it begins to monitor the skydiver’s altitude and fall rate. The pressure sensor measures the atmospheric pressure 8 x per second in free fall.
-
Solo II Altimeter
RM1,500.00Add to cartSOLO II™ is an extremely accurate and reliable audible altimeter. The Solo II™ takes the simplicity of the original DYTTER™ with today’s technology to help you maintain altitude awareness. Developed with all skydiving disciplines in mind, the SOLO II™, when combined with our ALTITRACK™ visual altimeter and data recorder makes a perfect combination for all your altitude awareness needs.
-
Military Altimeter Basic
Read moreCovering All the Basics
LB strongly recommend changing the battery once a year!
The MILITARY ALTITRACK BASIC™ is the rugged offspring of our popular multi-function MILITARY ALTITRACK™. MILITARY ALTITRACK BASIC™ was designed to be a simple, hard-working, and rugged altimeter with the same altitude measuring precision in a basic, stripped down altimeter.
MILITARY ALTITRACK BASIC™ starts with a precision machined outer shell, a precise stepper-motor altitude indicator needle, and dual sensor components for reliability and accuracy built to military standards and precise construction parameters.
LB Altimeters has worked directly with several different countries to develop the MILITARY ALTITRACK BASIC™ as a less complicated altimeter in terms of additional features but just as robust, rugged and accurate as MILITARY ALTITRACK™. Like its predecessor, MILITARY ALTITRACK BASIC™ is designed to withstand extreme variables in both heat and cold that might be encountered in a military operations and daily pounding during training.
Ground elevation offsets can be adjusted manually for MILITARY ALTITRACK BASIC™ with a series of simple operations using the exterior adjustment buttons. MILITARY ALTITRACK BASIC™ is also fitted with a electroluminescent backlight for night jumping or low light conditions.
The MILITARY ALTITRACK BASIC™ comes with a curved arm mount.
-
Altiset II Altimeter
Read moreALTISET II™ Remote Control is an optional accessory.
ALTISET II™ is a small handheld control unit for setting mBar., altitude and warning* settings on all LB Tactical Altimeters via IrDA. The Jump Master/Load Master can instantly set mission specific parameters to all compliant LB Tactical Altimeters.
* warning settings only on ECHO™
Reviews
There are no reviews yet.