Military Altimeter Basic
Covering All the Basics
LB strongly recommend changing the battery once a year!
The MILITARY ALTITRACK BASIC™ is the rugged offspring of our popular multi-function MILITARY ALTITRACK™. MILITARY ALTITRACK BASIC™ was designed to be a simple, hard-working, and rugged altimeter with the same altitude measuring precision in a basic, stripped down altimeter.
MILITARY ALTITRACK BASIC™ starts with a precision machined outer shell, a precise stepper-motor altitude indicator needle, and dual sensor components for reliability and accuracy built to military standards and precise construction parameters.
LB Altimeters has worked directly with several different countries to develop the MILITARY ALTITRACK BASIC™ as a less complicated altimeter in terms of additional features but just as robust, rugged and accurate as MILITARY ALTITRACK™. Like its predecessor, MILITARY ALTITRACK BASIC™ is designed to withstand extreme variables in both heat and cold that might be encountered in a military operations and daily pounding during training.
Ground elevation offsets can be adjusted manually for MILITARY ALTITRACK BASIC™ with a series of simple operations using the exterior adjustment buttons. MILITARY ALTITRACK BASIC™ is also fitted with a electroluminescent backlight for night jumping or low light conditions.
The MILITARY ALTITRACK BASIC™ comes with a curved arm mount.
- 45 deg. offset scale for easy line of sight viewing when mounted on hand or wrist
- Altimeter casing in rugged, precision machined aircraft aluminum
- Choice of symmetric or asymmetric scale graduation in either feet or meters
- Adjustable electro-luminescent backlight for night jumping
- Smooth, none erratic pointer movement… step motor controlled
- Automatic calibration to local elevation
- Two separate pressure sensing modules for maximum reliability
- Scratch proof lens made from high-impact etched glass
- Shockproof and waterproof (5ft/24hrs)
- Operating altitude 0 to 40,000 ft.(0 to 12,191 m)
- Temp. range: -35°C to +80°C,
- Continuous operation: Will operate at -50°C for 10 minutes
- ½ AA battery (2yr. battery life)
| Dial Option : | 4,000 m, 6,000 m, 10,000 m, 12,000 m, 30,000 ft linear, 30,000 ft classic |
|---|
You must be logged in to post a review.
Related products
-
Solo II Altimeter
RM1,500.00Add to cartSOLO II™ is an extremely accurate and reliable audible altimeter. The Solo II™ takes the simplicity of the original DYTTER™ with today’s technology to help you maintain altitude awareness. Developed with all skydiving disciplines in mind, the SOLO II™, when combined with our ALTITRACK™ visual altimeter and data recorder makes a perfect combination for all your altitude awareness needs.
-
Military Altimeter
Read moreAnalog Display and Digital Accuracy
LB strongly recommend changing the battery once a year!
The MILITARY ALTITRACK™ looks like many of the more common analog altimeters used throughout the world… but look a little closer. MILITARY ALTITRACK™ is a rugged and precision instrument built to military standards and precise construction. LB Altimeters has worked directly with several different countries to develop the extremely reliable altimeter for Military use. The MILITARY ALTITRACK™ is designed to withstand extreme variables in both heat and cold that might be encountered in a military mission.
Coupled with the ALTISET™. A jumpmaster or mission commander can preset the mBar to the same reading for a small group or an entire load of military jumpers via the IR receiver on the MILITARY ALTITRACK™ with ALTISET™ giving greater adjustment between takeoff points and dropzone variations.
The MILITARY ALTITRACK™ comes with a curved arm mount.
-
Cutter
RM750.00Add to cart*This is the replacement one pin cutter for the M2 and M2 Multi.
The m² multi is an electronic automatic activation device, operating on the principle of pressure reading. The primary means of detecting the altitude and fall rate is a pressure sensor. The altitude is calculated based on the difference between the two atmospheric pressures. The pressure at current altitude and pressure on landing location “GROUND ZERO”. The pressure on the landing location is measured and set after switching on the device during calibration. This pressure is automatically adjusted by a change in barometric pressure during the day without the need for user intervention. The m² multi checks the ambient barometric pressure every 32 seconds and it determines whether the aircraft has taken off. If yes, it begins to monitor the skydiver’s altitude and fall rate. The pressure sensor measures the atmospheric pressure 8 x per second in free fall.
-
ECHO Altimeter
Read moreMade in aircraft grade aluminium, ECHO™ is a waterproof audible military altimeter. ECHO™ takes durability, superior engineering and accuracy to the troops. 3 warning banks, each with 4 warnings, only accessible via a code. Paired with the ALFA™ it makes the perfect altitude awareness system.
Coupled with the ALTISET™ a jumpmaster or mission commander can preset the mBar and warning altitudes to the same reading for a small group or an entire load of military jumpers via the IR receiver on the ECHO™ giving greater adjustment between takeoff points and drop zone variations.
Reviews
There are no reviews yet.